DESCRIPTION
The Wiegand interface is a de facto standard commonly used to connect a card reader or keypad to an electronic entry system. Wiegand interface has the ability to transmit signal over long distance with a simple 3 wires connection. This kit comes with open source schematic, PCB and C source code. It is all ready to go and easy to be modified for specific usage
Features Summary
RFID Reader Keypad
| Dimension |
85mm x 85mm |
| Wiegand Protocol |
Wiegand 26 bits for W26 Kit |
| Read Response |
Less than 0.5 second |
| Read Range |
2-10 cm estimated |
| Operating Voltage/Current |
6VDC - 14VDC, about 70ma working current |
| Card / Tag support |
EM4100 (125Khz) ID Card/Tag for W26 Kit |
| LED |
Red – System default
Green – System default and user controllable by pulling GREY wire to GND. |
| Buzzer |
System default and user controllable by pulling PURPLE wire to GND. |
| Wires |
- RED – 6VDC – 14VDC
- BLACK – Ground
- GREEN – Wiegand D0
- WHITE – Wiegand D1
- GREY – Green LED
- PURPLE - Buzzer
|
RFID Card/Key Fob Tag
EM4100 125Khz
Connection Diagram
Connection diagram for PIC18K14K50 Development Board
Connection diagram for Arduino
Downloads
Wiegand Tutorial
PIC18F14K50 Wiegand to HID Keyboard C source code
Wiegand 24 and Wiegand 36 protocol library for Arduino
Packing List
RFID Reader Keypad, card, Key Fob Tag
Image Description left to right, RFID Card, Mifare Key Fob, EM Key Fob
W26 Kit has the following items in the package
- 1 unit of EM 125Khz RFID Reader Keypad
- 5 units of EM 125Khz card
- 5 units of EM 125Khz Key Fob Tag
