DESCRIPTION

The Wiegand interface is a de facto standard commonly used to connect a card reader or keypad to an electronic entry system. Wiegand interface has the ability to transmit signal over long distance with a simple 3 wires connection. This kit comes with open source schematic, PCB and C source code. It is all ready to go and easy to be modified for specific usage
Features Summary
RFID Reader Keypad
Dimension |
85mm x 85mm |
Wiegand Protocol |
Wiegand 34 bits for W34 Kit |
Read Response |
Less than 0.5 second |
Read Range |
2-10 cm estimated |
Operating Voltage/Current |
6VDC - 14VDC, about 70ma working current |
Card / Tag support |
Mifare Classic 1K (13.56Mhz) ID Card/Tag for W34 Kit |
LED |
Red – System default Green – System default and user controllable by pulling GREY wire to GND. |
Buzzer |
System default and user controllable by pulling PURPLE wire to GND. |
Wires |
- RED – 6VDC – 14VDC
- BLACK – Ground
- GREEN – Wiegand D0
- WHITE – Wiegand D1
- GREY – Green LED
- PURPLE - Buzzer
|
RFID Card/Key Fob Tag
Mifare Classic 1K 13.56Mhz, Type A (ISO/IEC 14443 Type A)
Connection Diagram

Connection diagram for PIC18K14K50 Development Board

Connection diagram for Arduino
Downloads
Wiegand Tutorial
PIC18F14K50 Wiegand to HID Keyboard C source code
Wiegand 24 and Wiegand 36 protocol library for Arduino
Packing List

RFID Reader Keypad, card, Key Fob Tag

Image Description left to right, RFID Card, Mifare Key Fob, EM Key Fob
W34 Kit has the following items in the package
- 1 unit of Mifare 13.56Mhz RFID Reader Keypad
- 5 units of Mifare Classic 1K Card, 13.56Mhz, Type A (ISO/IEC 14443 Type A)
- 5 units of Mifare Classic 1K Key Fob Tag, 13.56Mhz, Type A (ISO/IEC 14443 Type A)